If you have a fire or water emergency, please call us now at (914) 358-9000

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

Mold Prevention Tips

4/5/2019 (Permalink)

  • Keep humidity levels as low as you can—no higher than 50%–all day long. An air conditioner or dehumidifier will help you keep the level low. Bear in mind that humidity levels change over the course of a day with changes in the moisture in the air and the air temperature, so you will need to check the humidity levels more than once a day.
  • Be sure your home has enough ventilation. Use exhaust fans which vent outside your home in the kitchen and bathroom. Make sure your clothes dryer vents outside your home.
  • Fix any leaks in your home’s roof, walls, or plumbing so mold does not have moisture to grow.
  • Clean up and dry out your home thoroughly and quickly (within 24–48 hours) after flooding.
  • Add mold inhibitors to paints before painting.
  • Clean bathrooms with mold-killing products.
  • Remove or replace carpets and upholstery that have been soaked and cannot be dried promptly. Consider not using carpet in rooms or areas like bathrooms or basements that may have a lot of moisture.
  • To learn more about preventing mold in your home, see the Environmental Protection Agency’s publication A Brief Guide to Mold, Moisture, and Your Home Cdc-pdf[PDF – 1.38 MB]External.
Content source: National Center for Environmental Health

Other News

View Recent Posts